BROCADE SILKWORM 200E FIBRE CHANNEL SAN SWITCH 3711397-01
Fibre Channel ports
Ports per chassis: 16 - 4 Gb GL ports. Starts at 8 ports and grows in increments of 4 - (i.e., 8,12,16)
Media Type: Hot-plug, industry standard LC small form factor pluggable (SFP)

  Scalability
Full fabric up to 16 switches in a fabric

  Certified maximum
10 switches, 3 hops
Larger fabrics may be certified as required

  Interoperability
The Brocade SilkWorm 200E supports all Dell/EMC switch products

  Performance
1.0625, 2.125 and 4.25 Gb/sec, full duplex Aggregate
Aggregate Throughput: 128 Gb/sec
Latency: 1.2 µ sec. with no contention, cut-through routing at 4 Gbit/sec

  ISL Trunking
16 ISLs - Use Any Port for ISL
Trunks interoperate with Brocade, Cisco, QLogic

  Aggregate bandwidth
128 Gb/sec end to end

  Fabric latency
1.2 µsec with no contention, cut-through routing at 4 Gb/sec

  Maximum frame size
2112-byte payload

  Classes of Service
Class 2, Class 3, Class F (inter-switch frames)

  Port Types
FL_Port, F_Port, and E_Port
Self-discovery based on switch type (GL_Port, or Brocade U_Port)

  Data Traffic Types
Fabric switches supporting unicast and broadcast

  Media Types
Small Form-factor Pluggable (SFP) laser
Short-wave up to 500 meters (1640 feet)
Long-wave up to 10 kilometres (6.2 miles)

  Fabric Services
Simple Name Server
Registered State Change Notification (RSCN)
Brocade Advanced Zoning
Monitoring
Brocade Web Tools

  Options
SFP Media; fixed rail kit

  Management software supported
Telnet
SNMP (FE MIB, FC Management MIB)
Brocade Advanced Web Tools with ease-of-use and ease-of-setup features
Brocade Advanced Zoning
Brocade Fabric Manager (optional)

  Management Access
10/100 Ethernet port (RJ-45)
Serial port (RS-232)
In-band through Management Server

  Diagnostics
POST and embedded online/offline diagnostics

  Physical Specifications
Non-port to port side airflow
1U, 19-inch EIA compliant
Height: 1.69 inches (4.29 centimetres)
Width: 16.87 inches (42.85 centimetres)
Depth: 12.10 inches (30.73 centimetres)
8.8 lbs (without SFPs)

  Environmental Specifications
Temperature
Operating: 0°C to 40°C (32°F to 104°F)
Non-Operating: -50°C to 100°C (-58°F to 212°F)

Humidity
Operating: 20 to 85 percent non-condensing at 40°C (104°F)
Non-Operating: 10% to 85%, non-condensing at 70° C (158° F)

Altitude
Operating: Up to 3000 meters (9800 feet)
Non-Operating: Up to 12 km (32,200 feet)

  Airflow
High speed: 37 CFM
Low speed (65%): 18 CFM

  Power Requirements
System power consumption: 60 Watts max, 45 Watts typical
Nominal input voltage: 100 to 240 VAC, Universal
Input line frequency: 47 to 63 Hz
Minimum input voltage: 100 VAC
Maximum input voltage: 240 VAC
BTU rating (80% efficiency): 512 BTU/hr
Inrush current: Maximum of 15 amps for period between 10 to 150 ms at 50° Celsius (122° Fahrenheit
Warranty : 90 days
Condition : Used / Pulled

Write a review

Note: HTML is not translated!
    Bad           Good

BROCADE SILKWORM 200E FIBRE CHANNEL SAN SWITCH 3711397-01

  • Views: 666
  • Brand: Brocade
  • Product Code: BROCADE SILKWORM 200E FIBRE CHANNEL SAN SWITCH
  • Availability: Out Of Stock
0 Product(s) Sold
  • Rs.19,000.00
  • Ex Tax: Rs.19,000.00

Tags: BROCADE SILKWORM, FIBRE CHANNEL, 3711397-01